Commercial Energy Code Calculations and Compliance
Engineer stamped
Energy code calculations and compliance for commercial, industrial and multi-family projects, worked to the code and compliance path the project's jurisdiction actually requires.
Energy code compliance is where commercial projects stall in plan review. Where the code allows it, we model the building, run the energy code calculations to demonstrate compliance on performance, and stamp the result.
What you get
- The building modeled, with compliance demonstrated on performance where the code allows it
- A completed, stamped compliance report in the format the reviewer expects
- The supporting load calculations, if you need those too
- A clear list of what the design must hold to in order to stay compliant
Every state is different
There is no single national energy code. Each state adopts its own: a particular edition of the IECC, ASHRAE 90.1, or a code the state has written itself. Local jurisdictions can amend it further. What changes from one state to the next is not just the numbers:
- Which code and which edition is in force, which is rarely the newest published
- Which compliance paths are permitted, and whether performance modeling is allowed at all for that occupancy
- Which documentation format the plan reviewer will accept
- Which software is mandated or expected for the submission
Getting this wrong is a common reason a compliance package comes back. We confirm the adopted code for the jurisdiction before any modeling starts, and work in whichever tool that jurisdiction expects: EnergyGauge or another as required.
Approach
Where the code permits performance modeling, we model the building and look for a route to compliance that lets the design keep what matters to it (unusual glazing ratios, a process load, an envelope the architecture will not give up).
The deliverable is a stamped report, plus a written list of the assumptions it depends on, so changes during value engineering can be checked against it.
Scale
Single buildings through multi-building developments. The resort development in our representative projects covered seven new buildings plus two renovations under one compliance scope.
Working with load calculations
Compliance work and load calculations share the same envelope and system inputs, so running both together is cheaper and removes a class of discrepancy that plan reviewers look for. See Cooling Load/Heat Load Calculations.
Representative projects
Hospitality · Key West, Florida
Multi-Building Resort Development
Nine buildings on one waterfront site, seven new and two renovations, each with its own occupancy, envelope and mechanical scope: hotel blocks, a lobby and restaurant, a fitness center and the ancillary structures behind them. Compliance was carried building by building and reconciled across the development, so no structure cleared on assumptions borrowed from its neighbor.
- Scope
- Energy compliance
- Buildings
- 7 new + 2 renovation
- Jurisdiction
- Florida
Multifamily · Lakewood Ranch, Florida
30-Unit Condominium Using Split System Heat Pumps
Energy code compliance for a 30-unit condominium, taken down the path the jurisdiction required rather than the one that is fastest to produce. One of more than 1,080 multifamily projects Adicot has designed over the past twelve years.
- Scope
- Energy compliance
- Units
- 30
- Jurisdiction
- Florida
FAQs
Which energy code applies to my project?
There is no single national energy code. Each state adopts its own: an edition of the IECC, ASHRAE 90.1, or a code the state has written itself, and local jurisdictions can amend it further. We confirm the adopted code for the jurisdiction before any modeling starts.
Which compliance software do you use?
Whichever tool the jurisdiction expects: EnergyGauge or another as required.
Which states can you stamp in?
Adicot holds active professional engineer licensure in 12 states: Arkansas, Florida, Illinois, Louisiana, Massachusetts, Nebraska, New York, Oklahoma, Pennsylvania, Texas, West Virginia and Wyoming. Our principal is an NCEES Model Law Engineer, a designation that supports licensure applications in other U.S. jurisdictions, so ask us if your project is somewhere else.
What do I receive?
A completed, stamped compliance report in the format the plan reviewer expects, plus a written list of what the design must hold to in order to stay compliant.
Can you do the load calculations as well?
Yes. Compliance work and load calculations share the same envelope and system inputs, so running both together is cheaper and removes a class of discrepancy that plan reviewers look for.
How long does it take?
Most projects are delivered within 5 to 10 business days of scope confirmation, with rush turnarounds available when the schedule requires one.
How much does it cost?
Most projects are priced through the online quote tool: enter the project type and square footage, and the fee appears on screen. That figure is preliminary. The final fee is confirmed in writing after we review your documents and scope.